Primary Navigation

Operating a Liberty PA speaker system

Setup Instructions:

  1. Make sure the power switch on the speaker is off
  2. Turn "Mic 1", "Mic 2" and "Aux" volume knobs down all the way, and turn "Bass" and "Treble" knobs to 12 o"clock
  3. Using the diagram below, connect mic, iPod and/or extra non-powered speaker
  4. Plug speaker power cable into a wall outlet
  5. Turn speaker power on
  6. While someone is speaking into the mic, slowly raise the "Mic 1" volume knob
  7. While the iPod is playing and its volume is set at 50%, slowly raise the "Mic 2" volume knob

Tips:

  • To avoid feedback (screeching sound), keep the mic positioned behind the speaker
  • Always plug the speaker power into a wall socket...don"t use the speaker"s internal battery